* The original content was created in Japanese, so some information, images, and links may still be in Japanese. We’re updating gradually and appreciate your patience.
1. Introduction
This article will walk you through the steps of obtaining power estimation results for your Intel® FPGA design using the Power Analyzer Tool in the Intel® Quartus® Prime development software. Step-by-step instructions are provided using the documentation and sample designs attached to this page.
This document covers the following topics
- Usage Environment
- Power Analyzer Tool operating procedures
（Power Analyzer Tool operating procedures (including generating VCD files and performing gate-level simulations)
- Introduction to the Power Analyzer Tool's power analysis reports
- How to deploy to Early Power Estimator 2.
2. advantages of using this sample
By using the actual sample, you can deepen your understanding at an early stage by experiencing the complicated operation procedures. 3.
3. environment
This article uses the following development tools.
Table 1] Development tools used in this article
| Item No. | Item | Description |
| 1 | Intel® Quartus® Prime Standard Edition | A tool for developing hardware for Intel® FPGAs. This document uses Intel® Quartus® Prime Standard Edition 22.1. |
| 2 | Questa* - Intel® FPGA Starter Edition | Questa* is a simulation tool to verify the behavior of each signal by displaying waveforms in a simulation to check the behavior of logic circuits implemented in Intel® FPGAs. This document uses Questa* - Intel® FPGA Starter Edition 2021.2, which is compatible with Quartus® Prime Standard Edition 22.1. |
Documentation/Samples
Documentation
- Power Analyzer Tool Operating Instructions
📦 Sample Projects
- Sample projects used in the document