No, the Address/Command pins of the QDR II SRAM are fixed.
In the case of Arria® 10, the pin assignment of the External Memory Interface is as shown in the following document.
(Reference)
Arria® 10 Device Pin-Out Files
External Memory Interface Pin Information
QDRII/II+Scheme 1" in this document is applicable, but the pin assignments are determined for the IO BANK where the Address/Command pins can be placed.
This is the same for Stratix® 10.
(Reference)
Stratix® 10 Device Pin-Out Files
External Memory Interface Pin Information
Cyclone® 10 GX does not support QDR II SRAM, so it is not applicable.
--------------------
Category: External Memory Interface
Tools: -
Devices: Arria® 10