Skip to main content

I tried to run the Board Test System with the Cyclone® 10 GX Development Kit, but it failed. I use J9 connector (Embedded Intel FPGA Download Cable II) to connect to the board.

I tried to run the Board Test System with the Cyclone® 10 GX Development Kit, but it failed. I use J9 connector (Embedded Intel FPGA Download Cable II) to connect to the board.

  • Updated

＜
Fail to read production information from this SOF in the FPGA.

Please try to change the TCK frequency of JTAG to a lower frequency.

＜Try changing the JTAG TCK frequency to a lower frequency.
1. Change the TCK frequency by referring to the following article:
[Let's change the TCK frequency of USB-Blaster™ II]
https://www.macnica.co.jp/business/semiconductor/articles/intel/130581/
2. Run BoardTestSystem while Programmer is still running
(*If Programmer is closed, the set frequency will return to the default setting)
3. Select the desired design from Configure and configure it
(*Since the TCK frequency is reduced, the configuration time is set to the default setting) (*TCK frequency is reduced, so the configuration time will be longer)

--------------------
Category: Development Kit
Tools: Quartus® Prime
Device: Cyclone® 10 GX

Related articles