Skip to main content

I am using Native PHY with Arria® 10. I would like to change the Analog Parameter, can I do this on the IP generation screen?

I am using Native PHY with Arria® 10. I would like to change the Analog Parameter, can I do this on the IP generation screen?

  • Updated

Analog Parameter must be set in the Assignment Editor or QSF.
The contents of the settings and default values are described in the following User Guide.

(Reference) Intel® Arria® 10 Transceiver PHY User Guide
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/arria-10/ug_arria10_xcvr_phy.pdf
(8. Analog Parameter Settings)

Check the Quartus® Prime Compilation Report to see if the settings you have made are reflected correctly.

Compilation Report > Fitter > Resource Section > GXB Reports
- Receiver Channel
- Transmitter Channel

--------------------
Category: Transceivers
Tools: Quartus® Prime
Device: Arria® 10

Related articles